Apple iPhone 16 Display, Battery, Charging Flex, Side Key & Full Parts Guide (A3081, A3287)
Apple iPhone 16 is the base model of the 2024 iPhone line — the 6.1-inch phone with the vertical dual cameras, the Action Button and the Camera Control button — and it is already on the mobilelcdled.com finder as Apple iPhone 16 (A3081, A3286, A3287, A3288, panel type OLED). This guide covers the full phone: display, battery, charging flex, power (side key) flex, logic board, long flex and body — so a shop or a buyer can check exactly what they are ordering before they pay. Nothing in this article is about the iPhone 16 Plus, iPhone 16 Pro, iPhone 16 Pro Max or iPhone 16e: those are different phones with different parts, and their specs and pictures are not used here.
iPhone 16 in Ultramarine, back view — the vertical dual-camera pill is how you tell it apart from the iPhone 16 Pro (three lenses) and the iPhone 16e (one lens) at a glance.
Most-searched keywords this article answers
iPhone 16 display price, iPhone 16 LCD replacement, iPhone 16 screen replacement, iPhone 16 OLED display, iPhone 16 Super Retina XDR display, iPhone 16 battery replacement, iPhone 16 battery 3561mAh, iPhone 16 charging port repair, iPhone 16 USB-C flex, iPhone 16 charging flex, iPhone 16 power button not working, iPhone 16 side key flex, iPhone 16 logic board, iPhone 16 motherboard, iPhone 16 back glass replacement, iPhone 16 MagSafe back glass, iPhone 16 body parts, iPhone 16 spare parts, iPhone 16 display compatibility, iPhone 16 vs 16e display, iPhone 16 vs 16 Plus display, iPhone 16 Camera Control button.
Display specs
Model on the finder: Apple iPhone 16 (A3081, A3286, A3287, A3288), panel type: OLED
Screen: 6.1-inch Super Retina XDR OLED, flat display
Resolution: 1179 x 2556 pixels (~460 ppi)
Refresh rate: 60 Hz (no adaptive refresh on this model)
Unlock: Face ID — there is no fingerprint sensor on this phone, so a display swap must keep the TrueDepth camera / earpiece module at the top of the display working, or Face ID will fail
Full mobile specification
Types / variants — which iPhone 16 is which
Model numbers: A3081 (USA), A3287 (international), A3286, A3288 — all are the same phone for display and parts purposes; always confirm the exact model number before ordering a part. The US model (A3081) has no physical SIM tray; other regions have a SIM tray.
SIM types: Nano-SIM + eSIM + eSIM (international, max 2 at a time); eSIM + eSIM (USA, 8 or more stored, max 2 at a time); Nano-SIM + Nano-SIM (China)
Colours: Ultramarine, Teal, Pink, White, Black
Launched: announced 9 September 2024, released 20 September 2024
Software: iOS 18 at launch, upgradable to later iOS versions
Processor details
Chipset: Apple A18 (3 nm)
CPU: hexa-core — 2x 4.04 GHz + 4x 2.20 GHz
GPU: Apple GPU (5-core graphics)
For repair: the processor is soldered on the logic board, so a processor fault is a board-level repair, not a part swap
RAM and storage details
RAM: 8 GB on every variant
Storage: 128 GB, 256 GB or 512 GB, NVMe fast storage
No memory card slot: storage cannot be expanded, so a buyer choosing a used iPhone 16 should check the storage size first, because it cannot be changed later
Charging type details
Wired charging: USB-C, PD2.0 — about 50% charge in 30 minutes with a suitable USB-C PD charger (advertised)
Wireless charging: 25W wireless (MagSafe / Qi2), 50% in 30 minutes; 15W wireless in China; 4.5W reverse wired
Port: USB Type-C 2.0 with DisplayPort support
In practice: this is the second iPhone generation on USB-C, and the port flex is a common wear part — a loose or one-angle-only port is usually the flex assembly, not the board
Camera details
iPhone 16 vertical dual camera module in white — 48 MP main lens on top, 12 MP ultra-wide below, flash to the side. Two lenses, not three: that is the base iPhone 16, not a Pro.
Rear video: 4K at 24/25/30/60 fps, 1080p at 25/30/60/120/240 fps, HDR, Dolby Vision HDR (up to 60 fps), stereo sound recording; dual-LED dual-tone flash, HDR photo/panorama
Front camera: 12 MP wide, f/1.9, 23mm, 1/3.6-inch sensor, PDAF, plus SL 3D depth sensor for Face ID
Front video: 4K at 24/25/30/60 fps, 1080p at 25/30/60/120 fps, gyro-EIS, HDR, Dolby Vision HDR, stereo sound recording
For repair: the two rear lenses sit in one vertical pill on the back glass. A cracked camera lens glass is a back-glass/lens job; a faulty lens itself means the camera module needs attention, not just the glass. The Camera Control button on the side is laser-welded to the frame — if that button itself fails, the frame has to be replaced.
Sound details
Loudspeakers: stereo speakers — one speaker at the bottom, one in the earpiece
3.5mm headphone jack: none — audio is via USB-C, Bluetooth 5.3 (A2DP, LE) or wireless earbuds
Sensors: Face ID, accelerometer, gyro, proximity, compass, barometer; Emergency SOS, Messages and Find My via satellite
Display / LCD — front side and back side pictures
A replacement iPhone 16 display is sold as a full assembly: OLED panel, touch digitizer, frame edge and the flex cables, with the earpiece speaker / TrueDepth module at the top. The panel is the same 6.1-inch Super Retina XDR OLED on every iPhone 16; the fitting work is different if the assembly comes with or without the frame, so always confirm which one a seller is quoting.
iPhone 16 OLED display assembly — left: front side of the panel with the Dynamic Island pill; right: back side showing the shielding, flex cables and the earpiece / TrueDepth module at the top.
If you need the iPhone 16 display, contact us through our Contact page for price and availability.
What the compatibility finder says — honestly
As of this draft, Apple iPhone 16 shows NO compatible models on the finder — and on current evidence that blank is correct:
NOT compatible: iPhone 16 Plus. Same family, bigger phone — a 6.7-inch panel against this phone's 6.1-inch panel. Do not fit a Plus display in a base iPhone 16.
NOT compatible: iPhone 16 Pro and iPhone 16 Pro Max. Different panels (ProMotion 120 Hz, different sizes and titanium frames), different camera cutouts, different boards. Do not mix Pro parts into a base iPhone 16.
NOT compatible: iPhone 16e. Also a 6.1-inch OLED phone, but a different display assembly: the 16e has a notch, this phone has a Dynamic Island, and the 16e has no Camera Control and no MagSafe. Same size does not mean same part — do not fit a 16e display in an iPhone 16.
No shared-display pair is proposed for this article. If a future parts listing proves a genuine shared panel, the finder — and this article — should be updated together, with the same (verify) honesty the site uses elsewhere.
That blank on the finder today is exactly why this section matters: before ordering an iPhone 16 panel, search the exact model on mobilelcdled.com and check the compatibility list, rather than trusting a seller listing that groups every "iPhone 16" model together.
Full parts details
1. Battery — 3561 mAh, 3.886 V, 13.839 Wh
iPhone 16 battery — the label on this battery reads "For iP 16", Li-ion, 3.886 V, 13.839 Wh, 3561 mAh.
Capacity: 3561 mAh, 3.886 V nominal, 13.839 Wh, Li-ion
Signs it needs replacing: phone swelling, battery draining fast, phone switching off at 20–30%, or not holding charge after a full charge
Fitting note: on this model Apple uses an electrically debonded adhesive for the battery, so a proper battery job releases the glue with a small current instead of prying — prying a glued battery is how punctures happen
Warning: a swollen battery must not be punctured or bent — replace it, do not keep using it
If you need the iPhone 16 battery, contact us through our Contact page for price and availability.
2. Charging flex / charging port flex assembly (USB-C)
iPhone 16 charging port flex assembly — USB-C port at the bottom, microphone meshes and the long flex tail that runs up to the logic board.
What it is: the flex assembly at the bottom of the phone carrying the USB-C charging port and the microphones. It connects up to the logic board through its long flex tail — on an iPhone there is no separate Android-style "charging sub board"; this flex assembly is the charging part.
Signs it is faulty: phone not charging, charging only at one cable angle, loose USB-C port, microphone not working on calls, or fast charging never kicking in even with the right charger
Fitting note: this flex is model-specific to the base iPhone 16 — a 16 Plus, 16 Pro or 16e charging flex does not fit, even though the USB-C ports look alike. On this generation the USB-C port itself is much simpler to remove than on older iPhones, but the flex still tears easily if pulled at an angle.
If you need the iPhone 16 charging flex, contact us through our Contact page for price and availability.
3. On / off strip — power button flex (side key flex)
iPhone 16 power button flex with its metal bracket — one long flex strip for the side (power) button.
What it is: one long flex strip carrying the power (on/off, side) button, with the metal bracket that holds it against the frame button.
Signs it is faulty: power button not working, button stuck or double-pressing, or the phone restarting when the button is pressed
Fitting note: this is a long, thin flex — it tears easily if pulled at an angle. Fit it with the frame button aligned first, then press the flex down, never the other way round.
Do not confuse it with the other two side buttons on this phone: the Action Button (above the volume buttons, replaces the old mute switch) and the Camera Control button (below the power button) are separate parts — and the Camera Control button is laser-welded to the frame, so a failed Camera Control button means a frame replacement, not a flex swap.
If you need the iPhone 16 power button flex, contact us through our Contact page for price and availability.
4. Main board (logic board)
iPhone 16 logic board from the iFixit teardown — the A18 chip, 8 GB RAM and 5G modem all sit on this board (coloured boxes are iFixit's chip-ID highlights).
Processor: Apple A18 (3 nm), hexa-core 2x 4.04 GHz + 4x 2.20 GHz, 5-core Apple GPU
Memory: 8 GB LPDDR5X RAM layered over the A18 applications processor (APL1V08); storage 128 GB / 256 GB / 512 GB (no microSD slot)
Modem and wireless: Qualcomm SDX71M 5G modem, USI Bluetooth / Wi-Fi module, Ultra Wideband (gen2) module, NFC controller
The board carries the cameras, SIM/eSIM, 5G, Wi-Fi 7, Bluetooth 5.3 and the display/battery/charging connectors — so a board fault can look like a display, charging or network fault. Check the flexes and connectors first; they are cheaper than a board.
Board-level repairs (no signal, no power, water damage) need a specialist — a board swap also changes the phone's identity, so data and activation checks matter before ordering one. The logic board here is two double-sided PCBs (a main board and an RF board) sandwiched together.
If you need the iPhone 16 main board, contact us through our Contact page for price and availability.
5. Long flex (interconnect flex) and LCD flex — do not mix them up
Long flex on this phone: iPhones do not have an Android-style long board-to-sub-board interconnect flex, because there is no sub board. The long flex you will see in an iPhone 16 is the charging port flex tail (section 2) running from the USB-C port up to the logic board. If it is damaged, the phone may stop charging, lose signal, or show a dead microphone — even though the port itself looks fine.
LCD flex: the flex on the back of the display itself (visible in the LCD picture above). It carries the picture and touch signals from the display to the logic board. A torn LCD flex means lines, no touch, or a black screen, and it usually means replacing the whole display assembly, not just the flex.
Rule for ordering: "charging flex" = the USB-C port flex assembly; "LCD flex" = the flex attached to the screen. Sellers sometimes list them under each other's names, so match the picture, not just the title.
Part number note: no flex part number was verified for this draft, so none is printed here — do not order by a guessed number.
If you need the iPhone 16 long flex or display flex, contact us through our Contact page for price and availability.
6. Body details — frame, back glass, size and weight
iPhone 16 back glass in Ultramarine — left: outside with the vertical dual-camera cutouts; right: inside showing the MagSafe magnet ring, camera lens rings and adhesive.
Size: 147.6 x 71.6 x 7.8 mm; weight: 170 g
Frame: aluminium — flat sides with rounded edges; the Camera Control button is laser-welded into this frame
Front glass: Ceramic Shield (2024 generation); back: colour-infused glass with the MagSafe magnet ring inside
Water resistance: IP68 (up to 6 m fresh water for 30 minutes) — this rating is lost once the phone has been opened unless new adhesive seals are fitted
Colours: Ultramarine, Teal, Pink, White, Black
Camera pill: the two rear lenses sit in one vertical pill — the quickest visual check that a phone (or a back glass) is a base iPhone 16 and not a Pro (three lenses) or a 16e (one lens)
If you need the iPhone 16 back glass or body parts, contact us through our Contact page for price and availability.
Why this matters for repair
The iPhone 16 is a high-volume repair phone, and its most-replaced parts — display, battery, charging flex and back glass — all look alike across the 16 family while fitting nothing else. The 6.1-inch Super Retina XDR OLED panel, the Dynamic Island (not a notch), the vertical dual cameras and the MagSafe back glass mean the replacement must be the exact base-iPhone-16 part — not a 16 Plus, 16 Pro or 16e look-alike.
Check the part before fitting: battery label 3561 mAh / 3.886 V / 13.839 Wh; USB-C charging flex assembly (not a sub board); power button flex with its metal bracket; logic board with A18 (APL1V08) and 8 GB RAM.
If a future model is confirmed to share this display, the finder — and this article — should be updated together, with the same (verify) honesty the site uses elsewhere.
Next articles in the same series (from the most-searched list)