OnePlus 13 Display, Battery, Charging Flex, Side Key & Full Parts Guide (CPH2653)
OnePlus 13 is one of the most-searched phones of 2025 — it sat in the global most-searched charts through 2025 — and it is already on the mobilelcdled.com finder as OnePlus 13 (panel type AMOLED). Note: the site record currently has a BLANK model number. The real global model number is CPH2653 (CPH2655 is also listed for this phone; the China model is PJZ110). This guide covers the full phone: display, battery, charging flex, on/off (side key) strip, main board, long flex and body — so a shop or a buyer can check exactly what they are ordering before they pay.
OnePlus 13, front and back, in Midnight Ocean — note the big round Hasselblad camera module, which is how you tell it apart from the 13R and 13s at a glance.
Most-searched keywords this article answers
OnePlus 13 display price, OnePlus 13 LCD replacement, OnePlus 13 screen replacement, OnePlus 13 CPH2653 display, OnePlus 13 PJZ110 display, OnePlus 13 battery replacement, OnePlus 13 battery BLP-B09, OnePlus 13 charging port repair, OnePlus 13 charging flex, OnePlus 13 power button not working, OnePlus 13 on off strip, OnePlus 13 side key flex, OnePlus 13 motherboard, OnePlus 13 back glass replacement, OnePlus 13 body parts, OnePlus 13 spare parts, OnePlus 13 display compatibility, OnePlus 13 vs 13R display, OnePlus 13 vs 13s display, OnePlus 13 vs OnePlus 12 display difference.
Display specs
Model on the finder: OnePlus 13 (model number blank on the site; global model CPH2653, China model PJZ110), panel type: AMOLED
Fingerprint: under-display ULTRASONIC sensor — this matters for repair, because some copy display assemblies are sold without the fingerprint flex cable. A display swap must keep the ultrasonic sensor working, so confirm the assembly includes the fingerprint flex before ordering.
Full mobile specification
Types / variants — which OnePlus 13 is which
Model numbers: CPH2653 (global / Europe), CPH2655 (also listed for this phone), PJZ110 (China) — all are the same phone for display and parts purposes; always confirm the exact model number before ordering a part. The site record currently shows a blank model number.
Storage + RAM types: 12 GB + 256 GB, 16 GB + 512 GB, 24 GB + 1 TB (the 24 GB version is mainly the China model)
CPU: octa-core — 2x 4.32 GHz Oryon V2 Phoenix L + 6x 3.53 GHz Oryon V2 Phoenix M
GPU: Adreno 830
For repair: the processor is soldered on the main board, so a processor fault is a board-level repair, not a part swap
RAM and storage details
RAM: 12 GB, 16 GB or 24 GB, LPDDR5X
Storage: 256 GB, 512 GB or 1 TB, UFS 4.0 fast storage
No memory card slot: storage cannot be expanded, so a buyer choosing a used OnePlus 13 should check the storage size first, because it cannot be changed later
Charging type details
Wired charging: 100W SUPERVOOC — about 50% charge in 13 minutes, full charge in about 36 minutes (advertised, with the original 100W charger)
In practice: the 100W wired + 50W wireless combination is one of the biggest everyday differences from the 13R and 13s, which have no wireless charging at all. A weak charging board will never deliver full 100W speed even with the right charger.
Camera details
OnePlus 13 rear camera module in Black Eclipse — three lenses in one big round Hasselblad module, with the "H" mark beside it.
Rear cameras (triple, Hasselblad): 50 MP wide, f/1.6, Sony LYT-808 sensor, with OIS and PDAF; 50 MP ultra-wide, f/2.0, 120-degree view; 50 MP telephoto, f/2.6, Sony LYT-600 sensor, 3x optical zoom, with OIS
Rear video: 8K at 30 fps, 4K at 30/60 fps with Dolby Vision, gyro-EIS stabilisation; LED flash, panorama, HDR
Front camera: 32 MP wide, f/2.4; video 4K at 30/60 fps, 1080p at 30/60 fps, gyro-EIS
For repair: the three rear lenses sit in one big round camera module on the back glass. A cracked module glass is a back-glass job; a faulty lens itself means the camera module needs attention, not just the glass.
Sound details
Loudspeakers: stereo speakers with Dolby Atmos — one speaker at the bottom, one in the earpiece
3.5mm headphone jack: none — audio is via USB-C, Bluetooth 5.4 (aptX HD, LHDC 5) or wireless earbuds
Sensors: under-display ultrasonic fingerprint, accelerometer, gyro, proximity, compass; face unlock via the front camera; alert slider on the left side (the 13s replaced it with a Plus Key — the 13 still has the slider)
Display / LCD — front side and back side pictures
A replacement OnePlus 13 display is sold two ways: with frame (the panel already fitted in the frame) and without frame (panel only, fitted into the old frame). Both are the same 6.82-inch LTPO AMOLED panel; the fitting work is different, so always confirm which one a seller is quoting. One warning specific to this phone: some copy assemblies are listed WITHOUT the fingerprint flex cable — since the fingerprint sensor is ultrasonic and part of the display assembly, an assembly without that flex will leave the fingerprint reader dead.
OnePlus 13 display panel, back side — the copper-coloured shielding, the display flex at the bottom, and the ultrasonic fingerprint module in the middle. The front side is the flat 6.82-inch panel shown in the hero picture above.
If you need the OnePlus 13 display, contact us through our Contact page for price and availability.
OnePlus 13 display assembly with frame, frame side — the panel fitted into the frame, ready for a frame-swap repair.
What the compatibility finder says — honestly
As of this draft, OnePlus 13 shows NO compatible models on the finder, and no joint display listing was found for it in this research. That blank is correct on current evidence:
NOT compatible: OnePlus 13R. The 13R screen is 6.78 inches at 1264 x 2780, against the 13's 6.82 inches at 1440 x 3168. Different size, different resolution, different panel — do not mix them.
NOT compatible: OnePlus 13s (and its China twin, the 13T). The 13s screen is 6.32 inches at 1216 x 2640. A much smaller phone — nothing fits.
NOT compatible: OnePlus 12, despite the same size. The OnePlus 12 screen is also 6.82 inches at 1440 x 3168, but it is a different panel generation with a different flex layout, and every parts listing found sells the 12 and 13 screens as separate, model-specific parts. Same size does not mean same part — do not fit a 12 screen in a 13.
Rumor, not fitment evidence: Oppo Find X8 Ultra. A pre-launch rumor said the 13 would share its BOE panel with the Find X8 Ultra. That is a rumor about the panel supplier, not a parts listing, and it is not a reason to cross-fit anything. The Find X8 Ultra is not on the finder either.
Battery note (not display): the 13R also has a 6000 mAh battery, but its battery is a different part — do not assume battery sharing from equal capacity.
That blank on the finder today is exactly why this section matters: before ordering a OnePlus 13 panel, search the exact model on mobilelcdled.com and check the compatibility list, rather than trusting a seller listing that groups every "OnePlus 13" name together.
Full parts details
1. Battery — BLP-B09, 6000 mAh (dual-cell)
OnePlus 13 battery BLP-B09 — the label reads 3000 mAh typical per cell (2920 mAh rated), SUPERVOOC. Two such cells make the phone's 6000 mAh total.
Part number: BLP-B09 (printed on the battery label, confirmed from the label photo)
Capacity: 6000 mAh total — a dual-cell pack, each cell 3000 mAh typical / 2920 mAh rated
Voltage: 7.64 V nominal (dual-cell pack), 22.92 Wh
Signs it needs replacing: phone swelling, battery draining fast, phone switching off at 20–30%, or not holding charge after a full charge
Warning: a swollen battery must not be punctured or bent — replace it, do not keep using it. The battery flex connector sits at the top of the battery.
If you need the OnePlus 13 battery, contact us through our Contact page for price and availability.
2. Charging flex / charging board (sub board)
OnePlus 13 charging sub board — USB-C port at the bottom, main flex connectors at the top. Small photo, but the board layout is the genuine OnePlus 13 sub board.
What it is: the small board at the bottom of the phone carrying the USB-C charging port. It connects to the main board through the long interconnect flex (see section 5).
Service pack / board print: no service-pack number was verified for this draft, so none is printed here — do not order by a guessed number. The board in the photo is printed with a short code, not a full service-pack number.
Signs it is faulty: phone not charging, charging only at one cable angle, loose USB-C port, microphone not working on calls, or 100W fast charging never kicking in even with the right charger
Fitting note: the charging board is model-specific to the OnePlus 13 — a 13R or 13s charging board does not fit, even though the ports look alike
If you need the OnePlus 13 charging flex, contact us through our Contact page for price and availability.
3. On / off strip — power button + volume flex (side key flex) — TEXT ONLY
What it is: the flex strip carrying the power (on/off) button and the volume up/down buttons. The OnePlus 13 also has a separate alert slider on the left side (visible in the body picture below) — the slider is its own small part, not part of the side-key flex.
Photo note: no verified OnePlus 13 side-key flex photo was found for this draft — the flex photos found in search had no readable model print and weak listing provenance, so they were rejected rather than risked. This section is text-only on purpose; do not order a side-key flex by picture alone, match the part number and the flex shape.
Signs it is faulty: power button not working, volume button stuck or double-pressing, or the phone restarting when a button is pressed
Fitting note: this is a long, thin flex — it tears easily if pulled at an angle. Fit it with the frame buttons aligned first, then press the flex down, never the other way round.
If you need the OnePlus 13 power button flex, contact us through our Contact page for price and availability.
The board carries the cameras, SIM/eSIM, 5G, Wi-Fi 7, Bluetooth 5.4 and the display/battery/charging connectors — so a board fault can look like a display, charging or network fault. Check the flexes and connectors first; they are cheaper than a board.
Photo note: no verifiable OnePlus 13 main-board photo was found for this draft, so this section is text-only. Do not use a generic OnePlus board photo here — a wrong board photo is worse than no photo.
Board-level repairs (no signal, no power, water damage) need a specialist — a board swap also changes the phone's identity, so data and IMEI checks matter before ordering one.
If you need the OnePlus 13 main board, contact us through our Contact page for price and availability.
5. Long flex (interconnect flex) and LCD flex — do not mix them up
Long interconnect flex: the long flex that runs between the main board (top) and the charging sub board (bottom). It carries charging, USB data and antenna signals. If it is damaged, the phone may stop charging, lose signal, or show a dead microphone — even though the charging board itself is fine.
LCD flex: the short flex on the back of the display itself (visible at the bottom of the panel photo above). It carries the picture and touch signals from the display to the main board. A torn LCD flex means lines, no touch, or a black screen, and it usually means replacing the whole display assembly, not just the flex.
Rule for ordering: "long flex" = board-to-charging-board flex; "LCD flex" = the flex attached to the screen. Sellers sometimes list them under each other's names, so match the picture, not just the title.
Part number note: no long-flex part number was verified for this draft, so none is printed here — do not order by a guessed number.
If you need the OnePlus 13 long flex or display flex, contact us through our Contact page for price and availability.
6. Body details — frame, back glass, size and weight
OnePlus 13 in Arctic Dawn — the white glass back with the big round Hasselblad module, the "H" mark, and on the side the alert slider above the volume and power buttons.
Size: 162.9 x 76.5 x 8.5 mm; weight: 210 g (glass back) or 213 g (Midnight Ocean leather back)
Frame: aluminium — flat sides with rounded edges
Front glass: Crystal Shield glass; back: glass (Arctic Dawn, Black Eclipse) or silicone polymer leather (Midnight Ocean)
Water resistance: IP68 + IP69 (dust-tight, and water-resistant beyond the usual IP68 test) — this rating is lost once the phone has been opened unless new adhesive seals are fitted
Colours: Arctic Dawn, Black Eclipse, Midnight Ocean
Camera module: the three rear lenses sit in one big round Hasselblad module — the quickest visual check that a phone (or a back glass) is a OnePlus 13 and not a 13R, whose module is smaller and differently arranged
If you need the OnePlus 13 back glass or body parts, contact us through our Contact page for price and availability.
Why this matters for repair
A flagship AMOLED panel is the most expensive part on this phone, so a wrong fitment is a costly return. The 13's 6.82-inch QHD+ panel, ultrasonic under-display fingerprint sensor and 100W charging mean the replacement must be the exact OnePlus 13 panel (CPH2653 / CPH2655 / PJZ110) — not a look-alike from the 13R, 13s, 13T or even the same-sized OnePlus 12.
Check the part number on every part before fitting: battery BLP-B09; display sold for CPH2653 / CPH2655 / PJZ110; charging board model-specific to the 13.
If a future model is confirmed to share this display, the finder — and this article — should be updated together, with the same (verify) honesty the site uses elsewhere.
Next articles in the same series (from the most-searched list)