Redmi A5 Display, Battery, Charging Flex, Side Key & Full Parts Guide (25028RN03G)
Redmi A5 is one of the best-selling budget phones of 2026 — it completed the global top 10 best-selling smartphones in Q1 2026 — and it is already on the mobilelcdled.com finder as Redmi A5 (25028RN03G, panel type LCD). This guide covers the full phone: display, battery, charging flex, on/off (side key) strip, main board, long flex and body — so a shop or a buyer can check exactly what they are ordering before they pay.
Redmi A5, front and back, in Sandy Gold — note the waterdrop notch on the front and the vertical camera island on the back, which is how you tell it apart from older Redmi A models at a glance.
Most-searched keywords this article answers
Redmi A5 display price, Redmi A5 LCD replacement, Redmi A5 screen replacement, Redmi A5 original display, Redmi A5 25028RN03G display, Redmi A5 battery BP5E, Redmi A5 battery replacement, Redmi A5 charging port repair, Redmi A5 charging flex, Redmi A5 power button not working, Redmi A5 on off strip, Redmi A5 side key flex, Redmi A5 motherboard, Redmi A5 back cover replacement, Redmi A5 body parts, Redmi A5 spare parts, Redmi A5 display compatibility, Redmi A5 vs Poco C71 display.
Display specs
Model on the finder: Redmi A5 (25028RN03G), panel type: LCD
Refresh rate: up to 120 Hz, touch sampling up to 240 Hz
Brightness: 450 nits (typical)
Contrast: 1500:1, 70% NTSC, 8-bit colour, DC dimming
Fingerprint: side-mounted sensor in the power button — it is NOT part of the display, so a display swap does not affect the fingerprint sensor (unlike under-display sensors on AMOLED phones)
Full mobile specification
Types / variants — which Redmi A5 is which
Model numbers seen on parts listings: 25028RN03G (global version, on the finder), 25028RN03L, 25028RN03Y, 25028RN03A — all are the same phone for display and parts purposes; always confirm the exact model number before ordering a part
For repair: the processor is soldered on the main board, so a processor fault is a board-level repair, not a part swap
RAM and storage details
RAM: 3 GB, 4 GB or 6 GB depending on variant (plus memory extension, above)
Storage: 64 GB or 128 GB, eMMC 5.1
Memory card slot: dedicated microSDXC slot — storage CAN be expanded here, unlike many mid-range phones, so a buyer does not need to worry about storage size as much as on a phone without a card slot
Charging type details
Wired charging: 15W wired charging — this is a budget phone, so charging is slow compared to mid-range phones; a full charge takes well over an hour
Wireless charging: none — this phone charges by cable only
Port: USB Type-C 2.0
In practice: because the phone only charges at 15W, a faulty charging board shows up as slow charging or no charging at all, not as "fast charging not working" — if the phone charges at all, the board is probably fine and the cable or charger is the first thing to check
Camera details
Redmi A5 back cover with lens, Ocean Blue — the vertical camera island with the "AI CAMERA" print, holding the 32 MP main camera and the auxiliary lens.
Rear cameras (dual, one real sensor): 32 MP main, f/2.0; auxiliary lens; LED flash, HDR
Rear video: 1080p at 30 fps, 720p at 30 fps
Front camera: 8 MP wide, f/2.2; video 1080p at 30 fps, 720p at 30 fps; HDR, portrait mode, night mode
For repair: the two lenses sit in one vertical island on the back cover. "Dual camera" here means one 32 MP sensor plus an auxiliary lens — a cracked island glass is a back-cover job; a faulty main lens means the camera module needs attention, not just the glass
Sound details
Loudspeaker: yes, single loudspeaker
3.5mm headphone jack: yes — wired earphones work directly, unlike many mid-range phones
Other connectivity: Wi-Fi 802.11 a/b/g/n/ac (dual-band), Bluetooth 5.2 (A2DP, LE), GPS / Galileo / GLONASS / BDS, FM radio; NFC: no
Sensors: side-mounted fingerprint, accelerometer, compass; virtual proximity sensing; AI face unlock via the front camera
Display / LCD — front side and back side pictures
A replacement Redmi A5 display is sold two ways that matter more than usual on this model: with frame and without frame — AND in a long-flex version and a short-flex version. The panel is the same 6.88-inch IPS LCD in all of them, but the flex cable length and routing are different, so always confirm which flex version a seller is quoting and match it to the old display. Ordering by model name alone is not enough on this phone.
Redmi A5 LCD display module — left: front side of the panel with the waterdrop notch; right: back side showing the frame, shielding and the long flex cables.
If you need the Redmi A5 display, contact us through our Contact page for price and availability.
Redmi A5 LCD display with frame, short-flex version — panel front on the left, and the frame side with the shorter flex on the right. One service-pack listing for this with-frame short-flex display lists number 5600010C3ZN00.
What the compatibility finder says — honestly
As of this draft, Redmi A5 shows NO compatible models on the finder. That blank is honest for now: no shared-display link has been approved for the finder yet, and this article does not add one. Before ordering an A5 panel, search the exact model on mobilelcdled.com and check the compatibility list, and match the flex version (long or short) to the old display, rather than trusting a seller listing that groups every budget Redmi together.
Full parts details
1. Battery — BP5E, 5200 mAh
Redmi A5 battery BP5E — the label on this battery reads BP5E, 5100 mAh rated / 5200 mAh typical, 3.84 V nominal.
Part number: BP5E (printed on the battery label)
Capacity: 5200 mAh typical, 5100 mAh rated, 19.97 Wh typical / 19.59 Wh rated
Voltage: 3.84 V nominal, Li-ion polymer; charging voltage limit 4.45 V; cell type 1ICP5/67/103
Charging: 15W wired charging; no wireless charging on this model
Signs it needs replacing: phone swelling, battery draining fast, phone switching off at 20–30%, or not holding charge after a full charge
Warning: a swollen battery must not be punctured or bent — replace it, do not keep using it.
Do not confuse it: the old Redmi 5A (2017) uses battery BN34 (3000 mAh). BN34 does NOT fit the Redmi A5 (2025). "A5" and "5A" are different phones — always order BP5E for the Redmi A5.
If you need the Redmi A5 battery, contact us through our Contact page for price and availability.
2. Charging flex / charging board (sub board)
Redmi A5 charging sub board, both sides — USB-C port, microphone and main flex connector; printed WCHMA5-4G.
What it is: the small board at the bottom of the phone carrying the USB-C charging port and the microphone. It connects to the main board through the long interconnect flex (see section 5).
Signs it is faulty: phone not charging, charging only at one cable angle, loose USB-C port, or microphone not working on calls
Fitting note: the charging board is model-specific to the Redmi A5 — a board from another budget Redmi does not fit, even though the ports look alike. Some sellers list this part as a charging flex with microphone rather than a board; match the picture, not just the title.
If you need the Redmi A5 charging flex, contact us through our Contact page for price and availability.
3. On / off strip — power button + volume flex (side key flex)
Redmi A5 power button and volume side key flex — one strip carrying the power button and both volume buttons.
What it is: one flex strip carrying the power (on/off) button and the volume up/down buttons.
Side fingerprint: the fingerprint sensor is built into the power button, so after a side-key repair, always test the fingerprint as well as the buttons — a button that clicks but does not read a fingerprint means the sensor connection, not the button, is the problem
Signs it is faulty: power button not working, volume button stuck or double-pressing, fingerprint not reading, or the phone restarting when a button is pressed
Fitting note: this is a long, thin flex — it tears easily if pulled at an angle. Fit it with the frame buttons aligned first, then press the flex down, never the other way round.
If you need the Redmi A5 power button flex, contact us through our Contact page for price and availability.
4. Main board (motherboard) — text only, no verified photo
The board carries the cameras, SIM/microSD, 4G, Wi-Fi, Bluetooth 5.2 and the display/battery/charging connectors — so a board fault can look like a display, charging or network fault. Check the flexes and connectors first; they are cheaper than a board.
Board-level repairs (no signal, no power, water damage) need a specialist — a board swap also changes the phone's identity, so data and IMEI checks matter before ordering one.
No verified main-board photo was found for this draft, so none is shown here rather than a photo of the wrong board.
If you need the Redmi A5 main board, contact us through our Contact page for price and availability.
5. Long flex (interconnect flex) and LCD flex — do not mix them up
Long interconnect flex: the long flex that runs between the main board (top) and the charging sub board (bottom). It carries charging, USB data and antenna signals. If it is damaged, the phone may stop charging, lose signal, or show a dead microphone — even though the charging board itself is fine.
Short flex version: on this model the display itself is also sold in long-flex and short-flex versions (see the LCD section above) — that is a different thing from the interconnect flex. "Long flex display" means the display's own flex is long; it does not mean the interconnect flex.
LCD flex: the flex on the back of the display itself. It carries the picture and touch signals from the display to the main board. A torn LCD flex means lines, no touch, or a black screen, and it usually means replacing the whole display assembly, not just the flex.
Rule for ordering: "long flex" = board-to-charging-board flex, unless a listing says "long flex display" — in which case it means the display's flex. Sellers sometimes list them under each other's names, so match the picture, not just the title.
Part number note: no long-flex or interconnect-flex part number was verified for this draft, so none is printed here — do not order by a guessed number.
If you need the Redmi A5 long flex or display flex, contact us through our Contact page for price and availability.
6. Body details — frame, back cover, size and weight
Redmi A5 original back cover, Midnight Black — left: outside with the camera cutout and Redmi print; right: inside with the adhesive area and camera housing.
Size: 171.7 x 77.8 x 8.3 mm; weight: 193 g
Back cover: the back is a cover panel with the vertical camera island — a cracked back is a back-cover job, and the replacement must match the colour, because the island trim colour differs by colour variant
Front: waterdrop notch for the 8 MP front camera; no punch-hole on this model
Resistance: dust and splash resistant — this is not a waterproof rating, and it is lost once the phone has been opened unless new adhesive seals are fitted
Colours: Ocean Blue, Lake Green, Sandy Gold, Midnight Black
Camera island: the two lenses sit in one vertical island with the "AI CAMERA" print — the quickest visual check that a phone (or a back cover) is an A5 and not an older Redmi A model
If you need the Redmi A5 back glass or body parts, contact us through our Contact page for price and availability.
Why this matters for repair
Budget LCD panels are the most-replaced part on this phone, so a wrong fitment is a costly return. The A5's 6.88-inch IPS LCD, side fingerprint sensor and 15W charging mean the replacement must be the exact 25028RN03-series panel in the right flex version (long or short) — not a look-alike from another budget Redmi, and not a Redmi 5A part.
Check the part number on every part before fitting: battery BP5E (not BN34); charging board printed WCHMA5-4G; display service-pack listing 5600010C3ZN00 for the with-frame short-flex version.
If a future model is confirmed to share this display, the finder — and this article — should be updated together, with the same (verify) honesty the site uses elsewhere.
Next articles in the same series (from the most-searched list)