Xiaomi Redmi Note 13 Display, Battery, Charging Flex, Side Key & Full Parts Guide (23129RAA4G)
Xiaomi Redmi Note 13 is the plain 4G model of the Note 13 series — the one with the Snapdragon 685, a 6.67-inch 120 Hz AMOLED display, a 108 MP camera and a 5000 mAh battery — and it is one of the most-searched Redmi phones in repair shops, because it sells in huge numbers and its screen is the part that breaks first. Read the name carefully before ordering anything: this is not the Redmi Note 13 Pro 5G (Snapdragon 7s Gen 2, 67W charging, 200 MP camera with OIS, 1.5K display) and not the Redmi Note 14 (Helio G99 Ultra, bigger BR50 battery, Gorilla Glass 5). All three share the same 6.67-inch screen size on paper, but they are three different phones inside, with different batteries, boards and charging. This guide covers the plain Note 13 only — model number 23129RAA4G — display, battery, charging flex, on/off (side key) strip, main board, long flex and body, so a shop or a buyer can check exactly what they are ordering before they pay. It is already on the mobilelcdled.com finder as Redmi Note 13 (23129RAA4G, panel type AMOLED).
Redmi Note 13 4G in Midnight Black, Mint Green, Ice Blue and Ocean Sunset, with the front screen beside them — note the two big camera lenses in one square island at the top-left of the back, and the centred punch-hole front camera. That flat 6.67-inch screen and the square camera island are shared with the Note 13 5G on the outside, which is exactly why the model number (23129RAA4G) matters more than the look.
Most-searched keywords this article answers
Redmi Note 13 display price, Note 13 LCD replacement, Redmi Note 13 4G screen replacement, Xiaomi Note 13 original display, Note 13 23129RAA4G display, Note 13 battery replacement, Note 13 battery BN5P, Note 13 charging port repair, Note 13 charging flex, Note 13 power button not working, Note 13 on off strip, Note 13 side key flex, Note 13 motherboard, Note 13 back glass replacement, Note 13 body parts, Note 13 spare parts, Note 13 display compatibility, Note 13 vs Note 13 Pro 5G display, Note 13 vs Note 12 display difference, Note 13 vs Note 14 display.
Resolution: 1080 x 2400 pixels (FHD+, 20:9, ~395 ppi)
Refresh rate: 120 Hz
Brightness: 1800 nits (peak); contrast ratio 5,000,000:1; 100% DCI-P3 wide colour gamut; Sunlight display, Reading mode, TÜV Rheinland Low Blue Light, Circadian Friendly and Flicker Free certifications
Protection: Corning Gorilla Glass 3
Fingerprint: under-display, optical — part of the display assembly's function. So a cheap replacement panel that does not support it will cost the buyer the fingerprint unlock (see the LCD section). This is a real change from the Redmi Note 12, whose fingerprint sensor sits in the side power button
Full mobile specification
Types / variants — which Note 13 is which
Model numbers: 23129RAA4G, 23124RA7EO, 23129RA5FL — all are the same phone for display and parts purposes; always confirm the exact model number before ordering a part. 23129RAA4G is the global model.
SIM types: dual Nano-SIM (Nano-SIM + Nano-SIM), plus a microSDXC slot that uses the shared SIM slot — so a memory card and a second SIM cannot be used at the same time. This is a real difference from the Redmi Note 12, which has a dedicated microSD slot
Colours: Midnight Black, Mint Green, Ice Blue, Ocean Sunset
Launched: announced 15 January 2024, released 15 January 2024
Software: Android 13 with MIUI 14 at launch, upgradable to Android 15, HyperOS 2
For repair: the processor is soldered on the main board, so a processor fault is a board-level repair, not a part swap. The chip itself is visible in the main-board photo below, printed SM6225. And note the chipset before ordering a board: this is the same Snapdragon 685 as the Redmi Note 12, but the boards are not the same part — different fingerprint, different camera, different body — so a Note 12 board will not work in this phone, and a Note 13 Pro 5G board (Snapdragon 7s Gen 2) will not work either
RAM and storage details
RAM: 6 GB or 8 GB depending on variant (LPDDR4X)
Storage: 128 GB, 256 GB or 512 GB, UFS 2.2 fast storage
Memory card slot: yes — microSDXC, but it uses the shared SIM slot, so it is either a second SIM or a memory card, not both. The Redmi Note 12 has a dedicated slot, so a buyer moving between the two should not assume their card and both SIMs will fit
Charging type details
Wired charging: 33W fast charging, with a 33W charger in the box; 50% in 29 minutes, 100% in 70 minutes (GSMArena)
Wireless charging: none — this phone charges by cable only
Port: USB Type-C 2.0 with OTG support
In practice: 33W is half the Note 13 Pro 5G's 67W, so a Pro 5G charging board or charger will not make this phone charge any faster — and the charging board is a different part anyway (see section 2). If the phone charges slowly, check the board and the cable before blaming the battery
Rear video: 1080p at 30 fps only — this phone does not record 4K video, unlike the Pro models in the same series. LED flash, HDR, panorama
Front camera: 16 MP wide, f/2.4; video 1080p at 30 fps
For repair: the two big lenses, the small sensor and the flash sit in one square camera island on the back — the quickest visual check on a back panel. The main camera has no OIS (optical stabilisation), unlike the Note 13 Pro 5G's 200 MP camera with OIS, so do not order a Pro 5G camera module for this phone: the sensor, the stabilisation and the fitting are all different. The 108 MP main camera is the big upgrade over the Redmi Note 12's 50 MP camera — but the camera modules are still different parts, so do not mix them
Sound details
Loudspeaker: yes, with stereo speakers
3.5mm headphone jack: yes — audio works through wired earphones as well as USB-C and Bluetooth 5.1 (A2DP, LE)
Other connectivity: Wi-Fi 802.11 a/b/g/n/ac (dual-band), NFC (market/region dependent), GPS / GLONASS / GALILEO / BDS, infrared port
A replacement Note 13 display is sold two ways: with frame (the panel already fitted in the frame) and without frame (panel only, fitted into the old frame). Both are the same 6.67-inch AMOLED panel; the fitting work is different, so always confirm which one a seller is quoting. And beware the name trap: sellers list the same panel for the Note 13 4G, the Note 13 5G, the Note 14 4G/5G and even the Poco M7 Pro together — sometimes printed right on the listing photo — but that is seller grouping, not a confirmed original-parts match (see the finder section below). One more warning that matters on this phone: the fingerprint sensor is under the display, so a cheap panel that does not support the optical sensor will leave the phone without fingerprint unlock even if the picture and touch work fine.
Redmi Note 13 LCD display assembly — left: front side of the panel (black, with the punch-hole camera); right: back side showing the flex cables and the connector at the bottom, printed AMS667FZ01 MAIN. The big yellow "REDMI NOTE 13 4G" text on the front is printed on the listing photo itself, not shown on a lit screen — and the seller groups this panel with other models, which is not the same as a confirmed shared original part.
If you need the Redmi Note 13 display, contact us through our Contact page for price and availability.
Redmi Note 13 LCD assembly with frame — left: panel front; right: the frame side of the same assembly, in Ice Blue, with the flex connector at the bottom. The blue "REDMI NOTE 13" text on the front is printed on the listing photo itself.
What the compatibility finder says — honestly
As of this draft, the Redmi Note 13 (23129RAA4G) shows NO compatible models on the finder — and that blank is honest, not missing research:
No confirmed shared display. The finder row "Redmi Note 13" (23129RAA4G, AMOLED) has an empty compatible list. No original-parts cross-reference was found linking this panel to any other model, so nothing is added here.
NOT confirmed: Redmi Note 13 5G. Sellers group the 4G and 5G panels together, and both phones share the same 6.67-inch 120 Hz AMOLED size and the same BN5P battery — but their chipsets (Snapdragon 685 against Dimensity 6080), boards and charging boards are different, and no joint original service-pack listing was verified. Do not fit a Note 13 5G panel in a Note 13 4G on a seller's word alone — this one needs Ahmad's shop fitment check before the finder is changed.
NOT confirmed: Redmi Note 14. The same seller listings group the Note 13 4G panel with the Note 14 4G and 5G, and even the Poco M7 Pro. Same screen size on paper, different phone: Helio G99 Ultra instead of Snapdragon 685, a bigger BR50 5500 mAh battery instead of BN5P, and Gorilla Glass 5 instead of Gorilla Glass 3. Its panel does not fit this phone on the evidence available.
NOT compatible: Redmi Note 13 Pro 5G (2312DRA50G). Same screen size, different phone: Snapdragon 7s Gen 2 instead of Snapdragon 685, 67W instead of 33W, a 200 MP camera with OIS instead of 108 MP without OIS, a 1.5K display (1220 x 2712, ~446 ppi) instead of FHD+ (1080 x 2400, ~395 ppi), BM5V battery instead of BN5P, and Gorilla Glass Victus instead of Gorilla Glass 3. Its panel does not fit this phone.
NOT compatible: Redmi Note 12 (23021RAAEG). This is the trap that catches the most buyers: the Note 12 has the same Snapdragon 685, the same 6.67-inch 120 Hz AMOLED 1080 x 2400 panel and the same 5000 mAh 33W charging — yet the phones are different. The Note 12's fingerprint is in the side power button while this phone's is under the display, the Note 12's battery is BN5M while this phone's is BN5P, the cameras are 50 MP against 108 MP, and the bodies are different sizes (165.7 x 76 x 7.9 mm, 183.5 g against this phone's 162.3 x 75.6 x 8 mm, 188.5 g). Same chipset and same screen size do not mean a shared display.
Battery is model-specific too. The Note 13 battery is BN5P — match that code exactly. BN5M (Note 12), BM5V (Note 13 Pro 5G) and BR50 (Note 14) are all different batteries, and none of them belongs in this phone.
That blank on the finder today is exactly why this section matters: before ordering a Note 13 panel, search the exact model number (23129RAA4G) on mobilelcdled.com and check the compatibility list, rather than trusting a seller listing that groups every "Note 13" and "Note 14" model together.
Full parts details
1. Battery — BN5P, 5000 mAh
Redmi Note 13 battery BN5P, 5000 mAh — the label on this battery reads Model BN5P, rated capacity 4900 mAh / 19.07 Wh, typical capacity 5000 mAh / 19.45 Wh, nominal voltage 3.89 Vdc, charging voltage limit 4.48 Vdc, Li-ion Polymer, made in China, dated 2024-02-19. The orange pull-tab marked A and B runs along the edge, and the flex connector sits at the top of the battery.
Part number: BN5P (printed on the battery label; parts-listing evidence — see draft notes)
Capacity: 5000 mAh typical, 4900 mAh rated, 19.07/19.45 Wh (rated/typical)
Voltage: 3.89 V nominal, Li-ion Polymer; charging voltage limit 4.48 V
Charging: 33W wired fast charging; no wireless charging on this model
Signs it needs replacing: phone swelling, battery draining fast, phone switching off at 20–30%, or not holding charge after a full charge
Warning: a swollen battery must not be punctured or bent — replace it, do not keep using it. And match the code, not just the capacity: BN5M, BM5V and BR50 are all different batteries for other Redmi Note models, and none of them belongs in this phone. One online shop lists BN5J for this phone — BN5J is the Note 12 5G / Poco X5 battery, not this phone's, so that listing is wrong
If you need the Redmi Note 13 battery, contact us through our Contact page for price and availability.
2. Charging flex / charging board (sub board)
Redmi Note 13 charging sub board — USB-C port on the right, the SIM tray assembly on the left (this phone's microSD card uses the shared SIM slot, so the tray lives on this board), printed LIDC134 and 213. The small blue marks on the USB-C housing are residue on the part in the photo.
What it is: the small board at the bottom of the phone carrying the USB-C charging port and the SIM tray. It connects to the main board through the long interconnect flex (see section 5).
Printed marking: LIDC134, 213 — visible on the board in the photo above. No Xiaomi service-pack number was verified for this board, so none is printed here.
Signs it is faulty: phone not charging, charging only at one cable angle, loose USB-C port, SIM or memory card not detected, or 33W fast charging never kicking in even with the right charger
Fitting note: the charging board is model-specific to the Note 13 4G — a Note 13 5G or Note 13 Pro 5G charging board does not fit, even though the ports look alike. Note 13 5G boards are printed WCHMNT13-5G, which is a different board
If you need the Redmi Note 13 charging flex, contact us through our Contact page for price and availability.
3. On / off strip — power button + volume flex (side key flex)
Redmi Note 13 power button and volume side key flex — one orange flex strip with three button domes, printed KUHM13-4G. Unlike the Note 12, the power dome on this phone is NOT the fingerprint sensor — the fingerprint sensor is under the display.
What it is: one long flex strip carrying both the power (on/off) button and the volume up/down buttons. On this phone the power button is only a button — the fingerprint sensor is under the display, so a faulty side-key flex will not kill fingerprint unlock the way it does on the Note 12.
Printed marking: KUHM13-4G — visible on the flex in the photo above. No Xiaomi service-pack number was verified for this flex, so none is printed here.
Signs it is faulty: power button not working, volume button stuck or double-pressing, or the phone restarting when a button is pressed
Fitting note: this is a long, thin flex — it tears easily if pulled at an angle. Fit it with the frame buttons aligned first, then press the flex down, never the other way round
If you need the Redmi Note 13 power button flex, contact us through our Contact page for price and availability.
4. Main board (motherboard)
Redmi Note 13 main board (motherboard) — the Snapdragon 685 chip is visible in the centre, printed SM6225, beside the SK Hynix memory chip. The phone's internal codename is M335 (the long flex is printed M335_MAIN_FPC). No Xiaomi service-pack number was verified for this board, so none is printed here.
Processor: Qualcomm Snapdragon 685 (6 nm) — the chip is printed SM6225 in the photo above
Memory: 6 / 8 GB RAM; storage 128 GB / 256 GB / 512 GB, plus a microSDXC slot that shares the SIM slot
Internal codename: M335 — taken from the long flex print (M335_MAIN_FPC_D1-4). No board print code could be read reliably from the photo, so none is claimed here.
The board carries the cameras, dual SIM, 4G, Wi-Fi, Bluetooth 5.1 and the display/battery/charging connectors — so a board fault can look like a display, charging or network fault. Check the flexes and connectors first; they are cheaper than a board.
Board-level repairs (no signal, no power, water damage) need a specialist — a board swap also changes the phone's identity, so data and IMEI checks matter before ordering one.
If you need the Redmi Note 13 main board, contact us through our Contact page for price and availability.
5. Long flex (interconnect flex) and LCD flex — do not mix them up
Redmi Note 13 main interconnect flex — three of the same part shown together, each printed M335_MAIN_FPC_D1-4, with the "MAIN" end (top, main board) and the "SUB" end (bottom, charging board) marked, and an arrow showing the fitting direction. The "JIARUILA" text in the corner is the seller's brand on the listing photo, not part of the phone.
Long interconnect flex: the long flex that runs between the main board (top) and the charging sub board (bottom). It carries charging, USB data and antenna signals. If it is damaged, the phone may stop charging, lose signal, or show a dead microphone — even though the charging board itself is fine.
Printed marking: M335_MAIN_FPC_D1-4 — visible on the flex in the photo above. No Xiaomi service-pack number was verified for this flex, so none is printed here.
LCD flex: the short flex on the back of the display itself (visible in the LCD front/back photo above, printed AMS667FZ01 MAIN). It carries the picture and touch signals from the display to the main board. A torn LCD flex means lines, no touch, or a black screen, and it usually means replacing the whole display assembly, not just the flex.
Rule for ordering: "long flex" = board-to-charging-board flex (Main/SUB ends); "LCD flex" = the flex attached to the screen. Sellers sometimes list them under each other's names, so match the picture and the printed code, not just the title.
If you need the Redmi Note 13 long flex or display flex, contact us through our Contact page for price and availability.
6. Body details — frame, back panel, size and weight
Redmi Note 13 back panel in Ice Blue — two large camera lenses stacked vertically at the top-left, the small sensor and flash beside them, "108MP" printed next to the camera island and "Redmi" across the middle. The back is plastic, not glass, so it is a back panel (rear housing), not a glass replacement.
Size: 162.3 x 75.6 x 8 mm; weight: 188.5 g
Frame: plastic — flat sides, and at 8 mm this is one of the slimmest Redmi Note phones of its year
Water resistance: IP54 (dust protected, protected against water splashes) — this is splash resistance, not the IP68 of a flagship, and the rating is lost once the phone has been opened unless new adhesive seals are fitted
Colours: Midnight Black, Mint Green, Ice Blue, Ocean Sunset
Camera island: the two big lenses, the small sensor and the flash all sit in one square island — the quickest visual check that a back panel is a Note 13 part, and that a phone is a Note 13 rather than a Note 12 (whose camera island is rectangular) or a Note 14 (whose island is a rounded square)
If you need the Redmi Note 13 back glass or body parts, contact us through our Contact page for price and availability.
Why this matters for repair
A mid-range AMOLED panel is the most-replaced part on this phone, so a wrong fitment is a costly return. The Note 13's 6.67-inch panel, 120 Hz refresh rate and under-display fingerprint sensor mean the replacement must be the exact 23129RAA4G panel — there is no confirmed substitute, despite the same screen size on the Note 13 Pro 5G, the Note 13 5G and the Note 14, and despite sellers grouping all of them under one panel.
Check the part number on every part before fitting: battery BN5P (4900 mAh rated / 5000 mAh typical, 3.89 V); charging board printed LIDC134; side-key flex printed KUHM13-4G; long flex printed M335_MAIN_FPC_D1-4; LCD flex printed AMS667FZ01 MAIN; main-board chip SM6225.
If the Note 13 5G panel is ever confirmed to share this display from shop fitment, the finder — and this article — should be updated together, with the same (verify) honesty the site uses elsewhere.
Next articles in the same series (from the most-searched list)
Redmi Note 13 5G (the natural next one — its display story links straight into this article), Redmi Note 13 Pro 4G, Redmi Note 14 5G, Poco X6.