Apple iPhone 13 Display, Battery, Charging Flex, Side Key & Full Parts Guide (A2482, A2631, A2633, A2634, A2635)
Apple iPhone 13 is one of the most-searched iPhones of the last five years — the best-selling iPhone of 2022, the phone that brought the smaller notch, sensor-shift stabilisation and Cinematic mode to the standard iPhone, and still one of the most common iPhones on repair benches in 2026 — and it is already on the mobilelcdled.com finder as Apple iPhone 13 (A2482, A2631, A2633, A2634, A2635, panel type OLED). This guide covers the full phone: display, battery, charging flex, on/off (side key) strip, main board, long flex and body — so a shop or a buyer can check exactly what they are ordering before they pay.
iPhone 13, front and back, in Blue — the diagonal dual cameras on the back and the notch on the front are how you tell it apart from the iPhone 12 (straight-line cameras) and from the iPhone 13 Pro (three cameras, stainless steel frame).
Most-searched keywords this article answers
iPhone 13 display price, iPhone 13 LCD replacement, iPhone 13 screen replacement, iPhone 13 original display, iPhone 13 OLED screen, iPhone 13 display A2482, iPhone 13 battery replacement, iPhone 13 battery 3240mAh, iPhone 13 charging port repair, iPhone 13 Lightning flex, iPhone 13 power button not working, iPhone 13 on off strip, iPhone 13 side key flex, iPhone 13 motherboard, iPhone 13 logic board, iPhone 13 back glass replacement, iPhone 13 aluminium body parts, iPhone 13 spare parts, iPhone 13 display compatibility, iPhone 13 vs 14 display, iPhone 13 vs 12 display difference.
Resolution: 1170 x 2532 pixels, 19.5:9 ratio (~460 ppi)
Refresh rate: 60 Hz — no ProMotion and no always-on display on this model; ProMotion (120 Hz) belongs to the iPhone 13 Pro, not this phone
Protection: Ceramic Shield glass on the front; True Tone and P3 wide colour
Face ID: the front camera and Face ID sensors sit in the notch at the top of the screen — the notch is about 20% smaller than the iPhone 12 notch, so a replacement display must have the correct smaller notch, or the Face ID sensors will not sit right
Fingerprint: none — unlock is Face ID only, so there is no under-display fingerprint sensor to worry about when swapping the display
Model numbers: A2482 (USA), A2631 (Canada, Japan), A2633 (International), A2634 (China, Hong Kong), A2635 (Russia); internal identifier iPhone14,5 — all are the same phone for display and parts purposes; always confirm the exact model number before ordering a part
Storage + RAM types: 128 GB + 4 GB RAM, 256 GB + 4 GB RAM, 512 GB + 4 GB RAM — every iPhone 13 has 4 GB RAM, so storage size is the only difference between variants
GPU: Apple 4-core GPU; 16-core Neural Engine — the 5-core GPU belongs to the iPhone 13 Pro, not this model
For repair: the processor is soldered on the logic board, so a processor fault is a board-level repair, not a part swap
RAM and storage details
RAM: 4 GB in every variant
Storage: 128 GB, 256 GB or 512 GB, NVMe fast storage
No memory card slot: storage cannot be expanded, so a buyer choosing a used iPhone 13 should check the storage size first, because it cannot be changed later
Charging type details
Wired charging: Lightning, USB 2.0, with USB PD 2.0 — up to 50% charge in 30 minutes with a 20W adapter or higher (sold separately)
Wireless charging: 15W MagSafe, 7.5W Qi; 15W Qi2 after the iOS 17.2 update
Battery life (Apple's figures): video playback up to 19 hours, streamed video up to 15 hours, audio playback up to 75 hours
Port: Lightning — the iPhone 13 is the last-but-two generation with a Lightning port; the later iPhone 15 Pro Max moved to USB-C, so a USB-C flex does not fit this phone
In practice: a weak or wrong charge-port flex will never deliver full fast-charging speed even with the right charger, and a Lightning flex from another iPhone model does not fit — the iPhone 13 flex is model-specific
Rear video: 4K at 24/25/30/60 fps, 1080p at 25/30/60/120/240 fps, HDR, Dolby Vision HDR (up to 60 fps), Cinematic mode at 1080p and 30 fps, stereo sound recording; dual-LED dual-tone flash, HDR (photo/panorama)
Front camera: 12 MP wide, f/2.2, 23mm, 1/3.6-inch sensor, 1.0µm pixels, plus the SL 3D depth/biometrics sensor for Face ID; video 4K at 24/25/30/60 fps, 1080p at 25/30/60/120 fps, gyro-EIS; HDR
For repair: the two rear lenses sit diagonally in the square camera module — that diagonal layout is the quickest visual check that a phone (or a back glass) is an iPhone 13 and not an iPhone 12, whose two lenses sit in a straight vertical line. A cracked lens glass is a back-glass job; a faulty lens itself means the camera module needs attention, not just the glass
Sound details
Loudspeakers: stereo speakers — one speaker at the bottom, one in the earpiece
3.5mm headphone jack: none — audio is via Lightning, Bluetooth 5.0 (A2DP, LE) or wireless earbuds
Other connectivity: Wi-Fi 6 (802.11 a/b/g/n/ac/6, dual-band, hotspot), NFC, Ultra Wideband (UWB), GPS / GLONASS / GALILEO / BDS / QZSS; no FM radio
Sensors: Face ID, accelerometer, gyro, proximity, compass, barometer
Display / LCD — front side and back side pictures
A replacement iPhone 13 display is sold as a full assembly (panel with touch, flex cables and the earpiece speaker / Face ID sensor area at the top). It is also sold with frame and without frame. Both are the same 6.1-inch Super Retina XDR OLED panel; the fitting work is different, so always confirm which one a seller is quoting — and always confirm the listing says "iPhone 13" (A2482 / A2631 / A2633 / A2634 / A2635), not just "13 Pro" or "13 mini".
iPhone 13 OLED display assembly — left: front side of the panel, screen on, with the notch at the top; right: back side showing the shielding, the flex cables and the earpiece / Face ID sensor area at the top.
If you need the iPhone 13 display, contact us through our Contact page for price and availability.
What the compatibility finder says — honestly
As of this draft, iPhone 13 shows NO compatible models on the finder — and no original-parts evidence was found for any shared display either:
No shared display found. No original Apple display listing was found covering the iPhone 13 together with any other model, so nothing is added here — the blank on the finder is honest, not missing research.
NOT compatible: iPhone 13 mini. The mini is a 5.4-inch phone with a 1080 x 2340 panel — a completely different, smaller screen, even though the notch and the camera look similar.
NOT compatible: iPhone 13 Pro. The Pro shares the same 6.1-inch size and the same 1170 x 2532 resolution on paper, which is exactly why sellers group them — but the Pro panel is a 120 Hz ProMotion display with a different flex and different fitting, and the Pro has a third camera and a stainless steel frame. Same size on paper, different panel — do not mix them.
NOT compatible: iPhone 13 Pro Max. The Pro Max is a 6.7-inch phone with a 1284 x 2778 panel — bigger screen, bigger body, different display.
NOT compatible: iPhone 12. The iPhone 12 is also a 6.1-inch OLED phone, but its notch is larger, its display flex and connectors are different, and its cameras sit in a straight line, not diagonally. A 12 panel does not fit a 13.
NOT confirmed: iPhone 14. The iPhone 14 is the same 6.1-inch size with the same notch, but no original-parts listing was found covering both models, and the display flexes are not listed as shared. Do not fit an iPhone 14 panel in an iPhone 13 on a seller's word alone.
Battery is model-specific too. The iPhone 13 battery is 3240 mAh — match the model, not just the capacity; do not fit a battery from the 13 mini, 13 Pro or 13 Pro Max on the strength of a similar size.
That blank on the finder today is exactly why this section matters: before ordering an iPhone 13 panel, search the exact model on mobilelcdled.com and check the compatibility list, rather than trusting a seller listing that groups every "13" model together.
Full parts details
1. Battery — 3240 mAh
Aftermarket Eco Plus replacement battery kit for the iPhone 13, with its retail box and adhesive. The label reads "High Capacity 13", "Not for 13MINI 13Pro 13ProMax", 3550 mAh, 3.84 V — that 3550 mAh is the third-party maker's high-capacity claim; the genuine iPhone 13 battery is 3240 mAh (12.41 Wh), so check the capacity on the label before buying.
Capacity: 3240 mAh typical (12.41 Wh), Li-ion — Apple does not publish a wattage figure for the battery itself
Charging: wired PD 2.0, up to 50% in 30 minutes with a 20W adapter or higher; 15W MagSafe, 7.5W Qi, 15W Qi2 (after iOS 17.2)
Signs it needs replacing: battery health dropping under 80% in Settings, phone switching off at 20–30%, battery draining fast, or the back glass lifting from a swelling battery
Warning: a swollen battery must not be punctured or bent — replace it, do not keep using it. On iPhones the battery is glued in with pull-tabs; a battery swap also needs the battery health to be re-paired, or iOS may keep showing the old health figure.
Part number note: no Apple battery part code was verified for this draft, so none is printed here — do not order by a guessed number. (The aftermarket battery in the photo above is labelled model EC-IP13 — that is the third-party maker's own code, not an Apple part number.)
If you need the iPhone 13 battery, contact us through our Contact page for price and availability.
2. Charging flex / Lightning charge port flex
iPhone 13 Lightning charge port flex — the long flex assembly carrying the Lightning port, microphones and antenna connections up to the logic board.
What it is: the long flex assembly at the bottom of the phone carrying the Lightning charging port. It connects up to the logic board and carries charging, USB data, microphone and antenna signals.
Signs it is faulty: phone not charging, charging only at one cable angle, loose Lightning port, microphone not working on calls, or fast charging never kicking in even with the right charger
Fitting note: the charging flex is model-specific to the iPhone 13 — a Lightning flex from the iPhone 12, 13 mini, 13 Pro or 14 does not fit, even though the ports look alike
Part number note: no orderable part number was verified for this draft, so none is printed here — order by matching the photo and the model, not by a guessed number.
If you need the iPhone 13 charging flex, contact us through our Contact page for price and availability.
3. On / off strip — power button + volume flex (side key flex)
iPhone 13 power button and volume side-key flex — one long flex strip carrying the power (on/off) button and the volume up/down buttons, with the metal brackets that hold it against the frame buttons.
What it is: one long flex strip carrying both the power (on/off) button and the volume up/down buttons, with the metal brackets that hold it against the frame buttons.
Signs it is faulty: power button not working, volume button stuck or double-pressing, or the phone restarting when a button is pressed
Fitting note: this is a long, thin flex — it tears easily if pulled at an angle. Fit it with the frame buttons aligned first, then press the flex down, never the other way round.
Part number note: no orderable part number was verified for this draft, so none is printed here — order by matching the photo and the model, not by a guessed number.
If you need the iPhone 13 power button flex, contact us through our Contact page for price and availability.
4. Main board (logic board)
iPhone 13 logic board — the T-shaped board with its shielding removed, showing the A15 Bionic area, the Qualcomm 5G modem and the display, battery and charging connectors along its edges.
The board carries the cameras, SIM/eSIM, 5G, Wi-Fi 6, Bluetooth 5.0, UWB and the display/battery/charging connectors — so a board fault can look like a display, charging or network fault. Check the flexes and connectors first; they are cheaper than a board.
Board-level repairs (no signal, no power, water damage) need a specialist — a board swap also changes the phone's identity, so data and IMEI checks matter before ordering one.
Part number note: no logic-board number was readable from the photo, so none is printed here — do not order by a guessed number.
If you need the iPhone 13 main board, contact us through our Contact page for price and availability.
5. Long flex (interconnect flex) and LCD flex — do not mix them up
Long interconnect flex: on this iPhone there is no separate Samsung-style long flex between two boards. The job is done by the Lightning charge port flex (section 2 above) — the long flex that runs from the bottom of the phone up to the logic board. It carries charging, USB data, microphone and antenna signals. If it is damaged, the phone may stop charging, lose signal, or show a dead microphone — even though the Lightning port itself looks fine.
LCD flex: the short flexes on the back of the display itself, visible in the display photo above. They carry the picture and touch signals from the display to the logic board. A torn display flex means lines, no touch, or a black screen, and it usually means replacing the whole display assembly, not just the flex.
Rule for ordering: "long flex" = the Lightning charge-port flex from the bottom of the phone; "LCD flex" = the flex attached to the screen. Sellers sometimes list them under each other's names, so match the picture, not just the title.
Part number note: no long-flex or LCD-flex part number was verified for this draft, so none is printed here — do not order by a guessed number.
If you need the iPhone 13 long flex or display flex, contact us through our Contact page for price and availability.
6. Body details — frame, back glass, size and weight
iPhone 13 back glass housing in white (Starlight) — left: outside, with the diagonal dual-camera cutouts and the Apple logo; right: inside, with the MagSafe charging ring and the adhesive. The "1-3" written on the inside is the seller's own marking.
Size: 146.7 x 71.5 x 7.7 mm; weight: 174 g
Frame: aluminium — flat sides with the squared-off iPhone 12/13 shape, much lighter than the stainless steel frame of the 13 Pro
Front glass: Ceramic Shield; back: glass, with the MagSafe magnetic ring built in
Water resistance: IP68 (up to 6 m fresh water for 30 minutes) — this rating is lost once the phone has been opened unless new adhesive seals are fitted
Colours: Starlight, Midnight, Blue, Pink, (PRODUCT)RED; Green added 8 March 2022
Camera module: the two rear lenses sit diagonally in the square camera module — the quickest visual check that a phone (or a back glass) is an iPhone 13 and not an iPhone 12, whose lenses sit in a straight vertical line
If you need the iPhone 13 back glass or body parts, contact us through our Contact page for price and availability.
Why this matters for repair
The iPhone 13 is one of the most-repaired iPhones on the bench, so a wrong fitment is a costly return. Its 6.1-inch Super Retina XDR OLED panel, smaller notch and Face ID sensor window mean the replacement must be the exact A2482 / A2631 / A2633 / A2634 / A2635 panel — not a look-alike from the 13 mini, 13 Pro, 13 Pro Max or iPhone 12, despite the same screen size on paper.
Check the part on every part before fitting: battery 3240 mAh (not a high-capacity claim); charging flex and side-key flex matched by photo and model, not by a guessed part number. The later iPhone 14 Pro Max kept the Lightning port and the notch-free Dynamic Island design, while the iPhone 15 Pro Max moved to USB-C — so a Lightning flex from the 13 does not fit any USB-C iPhone.
If a future model is confirmed to share this display, the finder — and this article — should be updated together, with the same (verify) honesty the site uses elsewhere.
Next articles in the same series (from the most-searched list)
iPhone 14 Pro Max (the natural next one — the Lightning-port successor with the Dynamic Island), iPhone 15 Pro Max (the first USB-C Pro Max).