Xiaomi Redmi Note 11 Display, Battery, Charging Flex, Side Key & Full Parts Guide (2201117TG)
Xiaomi Redmi Note 11 is the plain 4G model of the Note 11 series — the one with the Snapdragon 680, a 6.43-inch 90 Hz AMOLED display, a 50 MP quad camera and a 5000 mAh battery — and it is one of the most-searched Redmi phones in repair shops, because it sold in huge numbers and its screen is the part that breaks first. Read the name carefully before ordering anything: this is not the Redmi Note 11S (Helio G96, 108 MP camera, 6.43-inch screen that only looks the same), not the Redmi Note 11 Pro (6.67-inch 120 Hz display, 67W charging), not the Redmi Note 11 5G (Dimensity 810, 6.6-inch LCD), and not the Redmi Note 11 4G sold in China under model number 21121119SC (Helio G88 — a different phone that shares the "Note 11 4G" name). This guide covers the plain Note 11 only — model number 2201117TG — display, battery, charging flex, on/off (side key) strip, main board, long flex and body, so a shop or a buyer can check exactly what they are ordering before they pay. It is already on the mobilelcdled.com finder as Redmi Note 11 (2201117TG, panel type AMOLED).
Redmi Note 11 in white — front screen with the centred punch-hole camera, and the back with the rectangular camera module at the top-left marked "AI-CAM PHOTOGRAPHY SYSTEM" and "Redmi" printed vertically near the bottom. That flat 6.43-inch screen and the four-lens camera island are the quickest visual checks that a phone is the plain Note 11 and not a Pro model, which is bigger and has a different camera island.
Most-searched keywords this article answers
Redmi Note 11 display price, Note 11 LCD replacement, Redmi Note 11 4G screen replacement, Xiaomi Note 11 original display, Note 11 2201117TG display, Note 11 battery replacement, Note 11 battery BN5D, Note 11 charging port repair, Note 11 charging flex, Note 11 power button not working, Note 11 on off strip, Note 11 side key flex, Note 11 fingerprint not working, Note 11 motherboard, Note 11 back panel replacement, Note 11 body parts, Note 11 spare parts, Note 11 display compatibility, Note 11 vs Note 11S display, Note 11 vs Note 12 display difference, Note 11 vs Note 13 display.
Resolution: 1080 x 2400 pixels (FHD+, 20:9, ~409 ppi)
Refresh rate: 90 Hz
Brightness: 700 nits, 1000 nits (peak); DCI-P3 wide colour gamut; contrast ratio 4,500,000:1; Sunlight display and Reading mode 3.0
Protection: Corning Gorilla Glass 3
Fingerprint: side-mounted, in the power button — part of the side-key flex, not part of the display. So unlike the Redmi Note 13, whose fingerprint sensor sits under the display, a cheap replacement panel on this phone will not cost the buyer fingerprint unlock — but a faulty side-key flex will (see section 3)
Full mobile specification
Types / variants — which Note 11 is which
Model numbers: 2201117TG, 2201117TI, 2201117TY, 2201117TL — all are the same phone for display and parts purposes; always confirm the exact model number before ordering a part. 2201117TG is the global model.
Storage + RAM types: 64 GB + 4 GB RAM, 64 GB + 6 GB RAM, 128 GB + 4 GB RAM, 128 GB + 6 GB RAM; some markets also sold an 8 GB + 128 GB option
SIM types: dual Nano-SIM (Nano-SIM + Nano-SIM), plus a dedicated microSDXC slot — so a memory card and both SIMs can be used at the same time. This is a real difference from the Redmi Note 13, whose microSD card uses the shared SIM slot
Colours: Graphite Gray, Twilight Blue, Star Blue
Launched: announced 26 January 2022, released 9 February 2022
Software: Android 11 with MIUI 13 at launch, upgradable to Android 13, HyperOS
For repair: the processor is soldered on the main board, so a processor fault is a board-level repair, not a part swap. And note the chipset before ordering a board: the Snapdragon 680 carries the same SM6225 part number as the Snapdragon 685 in the Redmi Note 12 and the Redmi Note 13, but the boards are not the same part — different display, different fingerprint, different camera, different body — so a Note 12 or Note 13 board will not work in this phone
RAM and storage details
RAM: 4 GB or 6 GB depending on variant (8 GB in some markets)
Storage: 64 GB or 128 GB, UFS 2.2 fast storage
Memory card slot: yes — microSDXC, on a dedicated slot, so it works alongside both SIMs
Charging type details
Wired charging: 33W Pro fast charging, with a 33W charger in the box; 100% in 60 minutes (GSMArena), with PD3.0 and QC3 support
Wireless charging: none — this phone charges by cable only
Port: USB Type-C 2.0 with OTG support
In practice: 33W is the same as the Redmi Note 12 and the Redmi Note 13, but only half the 67W of the Note 11 Pro — so a Pro charging board or charger will not make this phone charge any faster, and the charging board is a different part anyway (see section 2). If the phone charges slowly, check the board and the cable before blaming the battery
Rear video: 1080p at 30 fps only — this phone does not record 4K video. LED flash, HDR, panorama
Front camera: 13 MP wide, f/2.4; video 1080p at 30 fps
For repair: the four lenses and the flash sit in one rectangular camera island on the back — the quickest visual check on a back panel. The main camera is 50 MP, not 108 MP: do not order a Note 11S camera module for this phone, because the sensor and the fitting are different. The 50 MP main camera is the same resolution as the Redmi Note 12's — but the camera modules are still different parts, so do not mix them
Sound details
Loudspeaker: yes, with stereo speakers; 24-bit/192kHz Hi-Res audio
3.5mm headphone jack: yes — audio works through wired earphones as well as USB-C and Bluetooth 5.0 (A2DP, LE)
Other connectivity: Wi-Fi 802.11 a/b/g/n/ac (dual-band), NFC (market/region dependent), GPS / GLONASS / BDS / GALILEO, infrared port, FM radio
A replacement Note 11 display is sold two ways: with frame (the panel already fitted in the frame) and without frame (panel only, fitted into the old frame). Both are the same 6.43-inch AMOLED panel; the fitting work is different, so always confirm which one a seller is quoting. And beware the name trap: sellers list the same panel for the Note 11, the Note 11S, the Poco M4 Pro and the Note 12S together — sometimes printed right on the listing photo — but that is seller grouping, not a confirmed original-parts match (see the finder section below). One warning that does not apply on this phone: the fingerprint sensor is in the side power button, not under the display, so a cheap panel will not kill fingerprint unlock the way it does on the Redmi Note 13 — but a bad panel will still show dull colours, weak touch, or lines, so match the model number, not just the screen size.
Redmi Note 11 LCD display assembly — left: front side of the panel (black, with the centred punch-hole camera); right: back side showing the flex cable and the connector at the bottom. The big "Redmi Note 11" text on the front is printed on the listing photo itself, not shown on a lit screen — and the seller groups this panel with other models, which is not the same as a confirmed shared original part.
If you need the Redmi Note 11 display, contact us through our Contact page for price and availability.
What the compatibility finder says — honestly
As of this draft, the Redmi Note 11 (2201117TG) shows three compatible models on the finder — and all three are listed there as strong links, with no (verify) flag. That is worth saying plainly, because this article's own research could not confirm original-display sharing for any of the three — the finder and the research disagree, and the disagreement needs a shop fitment check to settle:
NOT confirmed by this article's research: Redmi Note 11S. The finder lists it as a strong link, with no (verify) flag. Both phones share the same 6.43-inch 90 Hz AMOLED screen size on paper, but they are different phones inside: Helio G96 against Snapdragon 680, a 108 MP camera against 50 MP, and different boards. No joint original service-pack listing was verified for the display. Do not fit a Note 11S panel in a plain Note 11 on a seller's word alone — this one needs Ahmad's shop fitment check, and if the check says they do not share, the finder entry should be downgraded to (verify).
NOT confirmed by this article's research: Poco M4 Pro (4G). The finder lists it as a strong link, with no (verify) flag. Same 6.43-inch 90 Hz AMOLED size, but Helio G96 instead of Snapdragon 680 and a 64 MP camera instead of 50 MP. Same warning as the 11S: same screen size on paper is not a confirmed shared display.
NOT confirmed by this article's research: Redmi Note 12S. The finder lists it as a strong link, with no (verify) flag. Same story again — 6.43-inch 90 Hz AMOLED, Helio G96, 108 MP camera. Its panel does not fit this phone on the evidence available.
NOT compatible: Redmi Note 11 Pro (2201116TG). Bigger phone, bigger screen: 6.67-inch 120 Hz Super AMOLED, Helio G96, 108 MP camera, 67W charging, 164.2 x 76.1 x 8.1 mm. Its panel does not fit this phone.
NOT compatible: Redmi Note 11 5G (21091116AC). Different phone entirely: Dimensity 810, 6.6-inch IPS LCD 90 Hz panel — not AMOLED at all — and a 50 MP camera in a different body. Its panel does not fit this phone.
NOT compatible: Redmi Note 12 (23021RAAEG). This is the trap that catches the most buyers: the Note 12 has the same 33W charging, the same 5000 mAh battery size and a chipset from the same SM6225 family — yet its panel is a 6.67-inch 120 Hz AMOLED, its battery is BN5M while this phone's is BN5D, and its body is bigger (165.7 x 76 x 7.9 mm, 183.5 g against this phone's 159.9 x 73.9 x 8.1 mm, 179 g). Same charging and same battery size do not mean a shared display.
Battery is a different story from the display. The Note 11 battery is BN5D, and the Xiaomi service pack 460200009U1Y is listed for the Note 11 and the Note 11S 4G together — so the two phones do share a battery, even though their display sharing is unconfirmed. Same battery does not mean same display: check each part on its own evidence. (See section 1.)
That gap between the finder and the evidence is exactly why this section matters: before ordering a Note 11 panel, search the exact model number (2201117TG) on mobilelcdled.com and check the compatibility list, rather than trusting a seller listing that groups every "Note 11" model together.
Full parts details
1. Battery — BN5D, 5000 mAh
Redmi Note 11 battery BN5D, 5000 mAh — the label on this battery reads Model BN5D, 1ICP5/64/89, Rechargeable Li-ion Polymer Battery, charging voltage limit 4.45 Vdc, rated capacity 4900 mAh / 18.96 Wh, typical capacity 5000 mAh / 19.35 Wh, nominal voltage 3.87 Vdc, made in China, dated 2022-01-19. The orange pull-tab runs along the left edge, and the flex connector sits at the top of the battery.
Part number: BN5D (printed on the battery label in the photo above; service pack 460200009U1Y, listed for the Redmi Note 11 and 11S 4G)
Capacity: 5000 mAh typical, 4900 mAh rated, 18.96/19.35 Wh (rated/typical)
Voltage: 3.87 V nominal, Li-ion Polymer; charging voltage limit 4.45 V
Charging: 33W wired fast charging; no wireless charging on this model
Signs it needs replacing: phone swelling, battery draining fast, phone switching off at 20–30%, or not holding charge after a full charge
Warning: a swollen battery must not be punctured or bent — replace it, do not keep using it. And match the code, not just the capacity: BN5M is the Note 12 battery, BN5P is the Note 13 battery, and BP4K is the Redmi Note 12 Pro 5G battery — none of them belongs in this phone. One more trap: BN43 is the Redmi Note 4X battery (4100 mAh), not this phone's — some listings mix it in, so do not order BN43 for a Note 11
If you need the Redmi Note 11 battery, contact us through our Contact page for price and availability.
2. Charging flex / charging board (sub board)
Redmi Note 11 charging sub board — two views of the same board: USB-C port in the middle, the SIM tray cage on the right of the lower view, and the board-to-board connector at the top. No printed board code could be read reliably from this photo, so none is claimed here.
What it is: the small board at the bottom of the phone carrying the USB-C charging port and the SIM tray. It connects to the main board through the long interconnect flex (see section 5).
Printed marking: none verified — no board code could be read reliably from the photo above, and no Xiaomi service-pack number was verified for this board, so none is printed here.
Signs it is faulty: phone not charging, charging only at one cable angle, loose USB-C port, SIM or memory card not detected, or 33W fast charging never kicking in even with the right charger
Fitting note: the charging board is model-specific to the plain Note 11 — a Note 11S, Note 11 Pro or Note 12 charging board does not fit, even though the ports look alike. And note the SIM tray: this phone has a dedicated microSD slot, so its tray is different from the shared-slot tray on the Note 13
If you need the Redmi Note 11 charging flex, contact us through our Contact page for price and availability.
3. On / off strip — power button + volume flex (side key flex)
Redmi Note 11 power button and volume side key flex — one orange flex strip with three button domes, printed M375_SIDEKEY and LJ 2227. The power dome on this phone IS the fingerprint sensor — the fingerprint sensor is side-mounted in the power button, not under the display.
What it is: one long flex strip carrying both the power (on/off) button and the volume up/down buttons. On this phone the power button is also the fingerprint sensor, so a faulty side-key flex can kill fingerprint unlock as well as the power button — the opposite of the Note 13, where the fingerprint sensor is under the display and a side-key fault leaves it working.
Printed marking: M375_SIDEKEY, LJ 2227 — visible on the flex in the photo above. No Xiaomi service-pack number was verified for this flex, so none is printed here.
Signs it is faulty: power button not working, volume button stuck or double-pressing, fingerprint not recognised even after re-registering it, or the phone restarting when a button is pressed
Fitting note: this is a long, thin flex — it tears easily if pulled at an angle. Fit it with the frame buttons aligned first, then press the flex down, never the other way round
If you need the Redmi Note 11 power button flex, contact us through our Contact page for price and availability.
4. Main board (motherboard)
Redmi Note 11 main board (motherboard) for model 2201117TY — printed LLDM379G1-1, RoHS HF 2202K. The processor and memory sit under the black shield on the right, so the SM6225 chip print is not visible in this photo and is not claimed from it. No Xiaomi service-pack number was verified for this board, so none is printed here.
Processor: Qualcomm Snapdragon 680 (6 nm) — SM6225, the same part number as the Snapdragon 685 in the Note 12 and Note 13, but on a different board that does not interchange with either of them
Memory: 4 / 6 GB RAM (8 GB in some markets); storage 64 GB / 128 GB, plus a dedicated microSDXC slot
Printed marking: LLDM379G1-1 — visible on the board in the photo above. No board print code beyond that is claimed here.
The board carries the cameras, dual SIM, 4G, Wi-Fi, Bluetooth 5.0 and the display/battery/charging connectors — so a board fault can look like a display, charging or network fault. Check the flexes and connectors first; they are cheaper than a board.
Board-level repairs (no signal, no power, water damage) need a specialist — a board swap also changes the phone's identity, so data and IMEI checks matter before ordering one.
If you need the Redmi Note 11 main board, contact us through our Contact page for price and availability.
5. Long flex (interconnect flex) and LCD flex — do not mix them up
Redmi Note 11 main interconnect flex — printed FKHMN11-M-YK2022M, with the "SUB" end (top, charging board) and the "MAIN" end (bottom, main board) marked, and an arrow showing the fitting direction. The seller lists this flex for the Note 11, Note 11S and Poco M4 Pro together — that is seller grouping, not a confirmed original-parts share.
Long interconnect flex: the long flex that runs between the main board (top) and the charging sub board (bottom). It carries charging, USB data and antenna signals. If it is damaged, the phone may stop charging, lose signal, or show a dead microphone — even though the charging board itself is fine.
Printed marking: FKHMN11-M-YK2022M — visible on the flex in the photo above. No Xiaomi service-pack number was verified for this flex, so none is printed here.
LCD flex: the short flex on the back of the display itself (visible in the LCD front/back photo above, at the bottom of the back side). It carries the picture and touch signals from the display to the main board. A torn LCD flex means lines, no touch, or a black screen, and it usually means replacing the whole display assembly, not just the flex. No print code could be read reliably from the LCD photo, so none is claimed here.
Rule for ordering: "long flex" = board-to-charging-board flex (MAIN/SUB ends); "LCD flex" = the flex attached to the screen. Sellers sometimes list them under each other's names, so match the picture and the printed code, not just the title.
If you need the Redmi Note 11 long flex or display flex, contact us through our Contact page for price and availability.
6. Body details — frame, back panel, size and weight
Redmi Note 11 back panel in blue — the rectangular camera island at the top-left with four lens holes and the flash, "Redmi" printed vertically near the bottom, and the CE marks on the lower right. The back is plastic, not glass, so it is a back panel (rear housing), not a glass replacement.
Size: 159.9 x 73.9 x 8.1 mm; weight: 179 g
Frame: plastic — flat sides, in the flat-frame design Xiaomi introduced with this series
Water resistance: IP53 (dust protected, protected against vertical water sprays) — this is splash resistance, not the IP68 of a flagship, and the rating is lost once the phone has been opened unless new adhesive seals are fitted
Colours: Graphite Gray, Twilight Blue, Star Blue
Camera island: the four lenses and the flash all sit in one rectangular island — the quickest visual check that a back panel is a plain Note 11 part, and that a phone is a Note 11 rather than a Note 12 (whose camera island is a different shape) or a Note 13 (whose island is square)
If you need the Redmi Note 11 back glass or body parts, contact us through our Contact page for price and availability.
Why this matters for repair
A mid-range AMOLED panel is the most-replaced part on this phone, so a wrong fitment is a costly return. The Note 11's 6.43-inch panel, 90 Hz refresh rate and side-mounted fingerprint sensor mean the replacement must be the exact 2201117TG panel — the finder lists the Note 11S, Poco M4 Pro and Note 12S as strong links, but this article's research could not confirm original-display sharing for any of the three, despite the same screen size on paper.
Check the part number on every part before fitting: battery BN5D (4900 mAh rated / 5000 mAh typical, 3.87 V, service pack 460200009U1Y); side-key flex printed M375_SIDEKEY; long flex printed FKHMN11-M-YK2022M; main board printed LLDM379G1-1. No printed code was verified for the charging board or the LCD flex, so none is printed in this article.
If shop fitment ever settles whether the Note 11S panel shares this display, the finder — and this article — should be updated together: confirmed means the strong finder entries stay, not confirmed means they should be downgraded to (verify).
Next articles in the same series (from the most-searched list)
Redmi Note 11S (the natural next one — its display story links straight into this article), Redmi Note 11 Pro, Redmi Note 12, Poco M4 Pro.